Page 1
10' Wave-2 Plus Telescopic Jib Arm Crane with CST-100 Stand & Portable Dolly (P-WV-2PL-SD) All rights reserved No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, except as may be expressly permitted...
Page 2
PROAIM 10' Wave-2 Plus Telescopic Jib Arm Crane with CST-100 Stand & Portable Dolly INTRODUCTION PROAIM welcomes you to the new and modernized era with its Proaim 10' Wave-2 Plus Telescopic Jib Arm Crane with CST-100 Stand & Potable Dolly, a portable filming solution to increase your production value.The Robust jib crane is specifically designed travel...
Page 3
PROAIM 10' Wave-2 Plus Telescopic Jib Arm Crane with CST-100 Stand & Portable Dolly Assembling 10' Wave-2 Plus Telescopic Jib Arm You can use the telescopic jib in 2 ways 1. In case of spreader, follow the following steps ...
Page 4
PROAIM 10' Wave-2 Plus Telescopic Jib Arm Crane with CST-100 Stand & Portable Dolly Now mount the Tripod Stand on Dolly, lock it in place with the rubber grips. Adjust riser height of Tripod by loosening lock controls located on each leg, slide the stand up to a desired level position and lock leg extensions in place to secure.
Page 5
PROAIM 10' Wave-2 Plus Telescopic Jib Arm Crane with CST-100 Stand & Portable Dolly NOTE It is important to make sure that the Central Fork is seated in the bowl properly. That means perpendicular to the tripod bowl. Off axis installation may hamper movement of the jib.
Page 6
PROAIM 10' Wave-2 Plus Telescopic Jib Arm Crane with CST-100 Stand & Portable Dolly Loosen the knobs of Jib arm to extend the front telescopic post of the Jib. Extend the Jib as per your requirement and tighten all the knobs to secure.
PROAIM 10' Wave-2 Plus Telescopic Jib Arm Crane with CST-100 Stand & Portable Dolly Camera Mounting Loosen the bolts of Jib bowl & remove the adapter plate. Mount your fluid head set-up onto the bowl plate and lock it with locking adapter.
PROAIM 10' Wave-2 Plus Telescopic Jib Arm Crane with CST-100 Stand & Portable Dolly YOUR PROAIM 10' WAVE-2 PLUS TELESCOPIC JIB ARM CRANE WITH CST-100 STAND & PORTABLE DOLLY ALL DRESSED UP AND GOOD TO GO (SHOWN WITH OPTIONAL ACCESSORIES) WARRANTY We offer a one year warranty for our products from the date of purchase.