Safety Hints - PROAIM P-W5P24-BASE Assembly Manual

Packaging Material of Box-1
 D-37 Dolly
 Dolly platform
Packaging Material of Box-4
 Cable Guide
 14.5ft Cable
 2x 13.5ft Cables  Supporting Rod
 7.9ft Cable  Central Fork
 6.9ft Cable  Wire Tensioners
 6.7ft Cable  Hooks
 3x 3.7ft Cables  Screws
 3.1ft Cable  Weigh Bar with Closers
 2.4ft Cable
 2.2ft Cable
 Safety Chain
Please use following sequence of pictures and text in order they appear to set up your new PROAIM
24FT BASE KIT. Technical assistance is available by contacting our sales representative.

Safety Hints

ATTENTION: PLEASE READ THIS BEFORE USING TO PREVENT DAMAGE TO EQUIPMENT
& OPERATOR!

The crane may not be assembled or operated under the influence of alcohol, drugs or any other
intoxicating substances. Lack of attention while connecting the components can cause substantial
damage to equipment/operator.

The crane may only be operated on levelled horizontal position. Make sure that the surface is stable.

Make sure the dolly and stand are correctly installed before the crane setup is put on.
Packaging Material of Box-2
 Tripod Stand
Packaging Material of Box-3
 Head Platform
 1st Jib Section - 6th Section
14.5ft
7.9ft
Cable 13.5ft Cables
Cable
3.7ft Cables
3.1ft Cable
Safety Chain
2.2ft
2.4ft
Cable
Cable
Wire
Central Fork
Tensioners
Hooks
2
6.9ft
6.7ft
Cable
Cable
Cable
Supporting
Guide Rod
Screws
Weight Bar
with Closers