PROAIM P-W5P24-BASE Assembly Manual page 6


Using the same approach insert 4th, 3rd and remaining sections to the joints and secure via bolts as
shown below.
Cable Guide & Rod Support Setup

Attach cable guide to cable guide clamp on 5th section properly. Loosen the bolts on cable guide clamp
in order to attach cable guide support rod to it. Retighten the bolt.

Attach hooks to provided hook slots on all sections of the jib as shown below.

Then attach 3 hooks to the hook that you attached (as per above image) with 1st section & 1 hook to
3rd section.
6
Cable guide
Support rod