Dataman S4 Manual page 60

DATAMAN S4 MANUAL
<$IRS232;Sending files>If handshaking is set to
RTS or DTR then those
signals must be true before transmission proceeds.
Assuming
that the transmission is proceeding with regard to
RTS, if RTS becomes
false the transmission stops until RTS becomes
true again.
At any point the transmission may be aborted by
the user pressing
the keypad ESCape key.
<$IKEY;RCVE>RCVE
KEY<$&RCVE>
@COMPUTER TEXT = >><R>
>><R>
>>RECEIVE ASCII<R>
00123,04567
S4 receives files in INTEL, MOTOROLA,
TEKHEX, ASCII or BINARY format,
as defined in the SETUP routine. You are
prompted for START and END
addresses in ASCII and BINARY only, because
these transmissions do
not contain any destination for the data. If the
transmission continues
after the specified END address, the remainder of
the file is "run
out" i.e. received, but discarded.
<$IRS232;Receiving data files>The keypad
ESCape key will abort transmission
whilst waiting for a file, or during the reception of
a file. After
60 <$IKEY;RCVE>RCVE KEY<$&RCVE>