Dataman S4 Manual page 58

DATAMAN S4 MANUAL
which changes to an underline when you hold a
key down to move quickly
through memory. If you move off the top or
bottom of the screen the
display scrolls up or down by one line. Editing is
immediate: once
the code is changed, there is no way of recovering
the original. The
ENTER key can be used to change the ADDRESS
without leaving EDIT.
<$IEditing;Remote>Remote Editing
The remote terminal screen has more columns
than the LCD and will
look like this:
@COMMAND = 00000 42 43 44 45 46 47 48 49
<$IRS232;Editing>The ADDRESS is followed by
the DATA in eight memory
locations. As usual with terminal editing the
SPACE/BACKSPACE keys
move the cursor through the data. Hex keys 0-9
and A-F will change
the data. The ADDRESS can be changed by
backspacing into the address
field.
When the ENTER key is pressed the ASCII
equivalent of the lines is
shown at the end and the next eight bytes
presented for editing:
@COMMAND = 00000 42 43 44 45 46 47 48 49
BCDEFGHI
@COMMAND = 00008 00 B1 46 92 8F FF 91
0C
Only ASCII characters 20H to 7EH are sent
through the interface, after
58 <$IKEY;EDIT>EDIT KEY<$&EDIT>