Table of Contents
Advertisement
DATAMAN S4 MANUAL
When code is downloaded into S4, it must be
MOVEd to address 00800
prior to emulation. For example:
@COMPUTER TEXT = >>MOVE<R>
00000,007FF,00800
<$IKEY;COMP>COMP
KEY<$&COMP>
@COMPUTER TEXT = <R>
>><R>
>>COMPARE 27256<R>
02000-03FFF=00000
@COMMAND = COMPARE (START)-
(END)=(DEST)
See Glossary for the special ways of editing the
parameter line.
START and END are in RAM, DEST is in the
PROM.
COMPARE matches all data in the PROM with
the contents of the USER-RAM
between the START and END addresses.
Locations which do not match
are reported. If the PROM matches the block
exactly, the message SAME
is displayed.
S4 must be configured for the right type of PROM.
A warning message
gives the PROM type. If the ESCape key is
pressed, whilst editing
the parameters, or after any reported mismatch
the process is aborted. To
start the COMPARE, or restart after a reported
mismatch, press the
50
<$IKEY;COMP>COMP KEY<$&COMP>
Advertisement
Table of Contents
