Bulletin Board - Dataman S4 Manual

DATAMAN S4 MANUAL
assembler creates a file of machine-code
automatically, but the file
is not usually actionable code. Actionable object
code which is placed
in memory exactly as it is received is called
BINARY format. Transmission
formats usually have a certain amount of extra
information, for example
the ADDRESS to start loading the data,
CHECKSUM bytes to validate
transmission etc. S4 receives files in common
formats which are output
by assemblers; formats such as INTELHEX,
MOTOROLA S, TEKHEX, ASCII
or BINARY and translates these into actionable
object code which is
stored in the USER RAM.

Bulletin Board

Dataman runs a 24 hour Bulletin Board
Service.
The BBS contains software updates for
Dataman products, including S3, S4 and
Omni-Pro. There are also useful utilities for
downloading.
Dataman welcomes all uploads to the system
and encourages discussion about our
products, suggestions for improvements,
complaints and items of general interest to
other users.
The BBS supports the following speeds
300(V21) 1200(V22) 2400(V22bis) 9600(V32)
14400(HST) with MNP error correction up to
level 4, V42 error correction and V42bis
18 Bulletin Board