How To Log On - Dataman S4 Manual

DATAMAN S4 MANUAL
data compression.

How to LOG ON:

Set your terminal program to the appropriate
baud rate and protocols.
Dial the BBS number 01300-321095.
If your modem speaker is turned on, you
should hear tones. Shortly afterwards a
CONNECT message should appear. The
BBS should then introduce itself:
Connected at 2400 Bits Per Second.
You are connected to the Dataman
Bulletin Board
[C]ontinue, [S]top, [N]onStop:
When RETURN is pressed the following
question will appear:
What is your First Name?
You should then enter your first name and press
RETURN.
@BULLET = What is you Last Name?
You should now enter your last name and press
RETURN. If this is
your first time on the system you will be asked:
@BULLET = The name [name] was not found in
the user database.
@BULLET = Is this name spelt correctly?
If the name is not correct, then press N and
RETURN. You will get two
more chances to enter your name correctly. If Y is
entered, the system
will log you on as a new user. You will be asked
several questions, such
as where you are calling from.
Bulletin Board 19