Table of Contents
Advertisement
DATAMAN S4 MANUAL
<F129M>d<F255D> keys. Press enter when the
correct part number is shown in
the display.
@BULLET = If you have a data sheet check that
the programming voltage
shown is correct.
@BULLET = 3) Press LOAD. S4 defaults to
copying the whole PROM into
the bottom of memory. If that is what you want
press ENTER, otherwise modify
the parameters.
@BULLET = 4) The verify that the data has
loaded correctly press COMP. S4
will compare the data in the PROM with tha data
you have just loaded
into RAM. If it matches you will se ther message
SAME
@BULLET = 5) Put a fresh PROM that you
want to program into the socket. If
it has a different part number then you must
reconfigure.
@BULLET = 6) Press TEST. S4 will report
whether the PROM can be programmed.
If the message "WILL BURN" or "BLANK
PROM" appears then all is well.
@BULLET = Otherwise you must erase the
PROM. FLASH devices can be
erased with FUNC BURN.(press FUNC first, then
BURN). EPROMS with a
window need a dose of UV light from an eraser.
@BULLET = 7. Press BURN, then ENTER. The
parameter line of numbers
can be modified if you do not want to burn all of
the PROM, but that
is unusual.
Getting Started Quickly
21
Advertisement
Table of Contents
