Table of Contents
Advertisement
DATAMAN S4 MANUAL
LOAD
L
O
>
>LOAD 2764A-AMD
02000-03FFF=00000
LOAD (START)-(END)=(DEST)
See Glossary for the special ways of editing
the parameter line.
LOAD copies the contents of the PROM in the
ZIF into USER-RAM. The area copied and
the destination is defined by the START and
END addresses.
S4 must be configured for the right type of
PROM. LOADing memory does not apply
program voltages or program pulses to the
PROM. PROMS of the same size and type
have
different
programming, but they can be read by the
same procedure. If the only difference is the
manufacturer and you intend to copy say,
27256 PROMS, of one manufacturer into
36
LOAD KEY
configurations
for
LOAD KEY
Advertisement
Table of Contents
