Emc Statement - Powercom 1000 User Manual

These products are tested and thereby comply with the conditions of CE regulation,
which established to offer sufficient protection against dangerous interference for
installation. Installation and use of the equipment should comply with the instructions
provided to avoid such interference due to the amount of radio frequency energy that
generates by the equipment; Despite this, we cannot assure that a certain amount of
interference may not occur in some installations.
If by turning on and off, you conclude that the equipment's harmful interference
influences your radio or television reception, use one of the following preventive
measures:
Place the receiving antenna in a separate location or orientation

Ensure a greater distance between the receiver and the equipment

Ensure that your Equipment connects to an outlet on a separate circuit

Contact a technician experienced with radio and TV or the dealer for technical

assistance
Units labelled with a CE mark comply with the following stander and directives:
EMC Directive 2014/30/EU

LVD Directive 2014/35/EU

Safety: EN 62040 - 1

EMC: EN 62040 - 2

The EC Declaration of Conformity is available upon request for production with a
CE mark.
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: 1. This device may not cause harmful interference, and 2. this
device must accept any interference received, including interference that may cause
undesired operation.
© All rights reserved. All trademarks are property of their respective owners.

EMC Statement

Declaration of Conformity Request
1