Emc Statement - Powercom 425A User Manual

These products are tested and thereby comply with the conditions of CE
regulation, which established to offer sufficient protection against dangerous
interference for installation. Installation and use of the equipment should comply with
the instructions provided to avoid such interference due to the amount of
radiofrequency energy that generates by the equipment; Despite this, we cannot assure
that a certain amount of interference may not occur in some installations.
If by turning on and off, you conclude that the equipment's harmful interference
influences your radio or television reception, use one of the following preventive
measures:
Place the receiving antenna in a separate location or orientation

Ensure a greater distance between the receiver and the equipment

Ensure that your Equipment connects to an outlet on a separate circuit

Contact a technician experienced with radio and TV or the dealer for technical

assistance
Units labelled with a CE mark comply with the following stander and directives:
EMC Directive 2014/30/EU

LVD Directive 2014/35/EU

Safety: EN 62040 - 1

EMC: EN 62040 - 2

The EC Declaration of Conformity is available upon request for production with a CE
mark.
© All rights reserved. All trademarks are property of their respective owners.

EMC Statement

Declaration of Conformity Request
1