Table Of Contents; Emc Statement - Powercom IMD-1025A User Manual

These products are tested and thereby comply with the conditions of CE regulation,
which established to offer sufficient protection against dangerous interference for
installation. Installation and use of the equipment should comply with the instructions
provided to avoid such interference due to the amount of radiofrequency energy that
generates by the equipment; Despite this, we cannot assure that a certain amount of
interference may not occur in some installations.
If by turning on and off, you conclude that the equipment's harmful interference
influences your radio or television reception, use one of the following preventive measures:
Place the receiving antenna in a separate location or orientation

Ensure a greater distance between the receiver and the equipment

Ensure that your Equipment connects to an outlet on a separate circuit

Contact a technician experienced with radio and TV or the dealer for technical

assistance
Units labelled with a CE mark comply with the following stander and directives:
EMC Directive 2014/30/EU

LVD Directive 2014/35/EU

Safety: EN 62040 - 1

EMC: EN 62040 - 2

The EC Declaration of Conformity is available upon request for production with a CE mark.
EMC Statement ................................................................................................... 1
1. IMPORTANT SAFETY INSTRUCTION ............................................................ 2
2. Introduction ................................................................................................ 2
3. Installation .................................................................................................. 2
3.1 Rear panel view ......................................................................................... 2
3.2 Connection to Main and Load ................................................................... 3
4. Operation .................................................................................................... 3
4.1 General Description .................................................................................. 3
4.2 System Configuration ................................................................................ 3
4.3 UPS Control ............................................................................................... 4
4.4 UPS Configuration ..................................................................................... 4
5. UPS Monitoring Connection ....................................................................... 5
6. Maintenance ............................................................................................... 5
6.1 Transportation .......................................................................................... 5
6.2 Storage ...................................................................................................... 5
6.3 Operation .................................................................................................. 5
6.4 Battery ....................................................................................................... 5
6.4.1 Maintenance ............................................................................. 5
6.4.2 Replacement ............................................................................. 5
APP-A. Troubleshooting ...................................................................................... 6
APP-B Technical Specifications ........................................................................... 7
French Safety Instruction........................................................................................................7
© All rights reserved. All trademarks are property of their respective owners.

EMC Statement

Declaration of Conformity Request
Table of content
1