Sega MARIO & SONIC AT THE RIO 2016 OLYMPIC GAMES Owner's Service Manual page 86

CLEANING THE COIN SELECTOR (MECHANICAL).
1
Remove and clean smears by using a soft cloth dipped in water or diluted chemical detergent and then
squeezed dry.
2
Remove the CRADLE.. When removing the
retaining ring (E ring) be very careful so as not to
bend the rotary shaft.
3
Remove stain from the rotary shaft and shaft
receiving portions by wiping off with a soft cloth.
etc.
4
After wiping off as per previous step, further apply a dry cloth to completely dry the Coin Selector.
Coin Insertion Test
Once every month, when performing the Coin SW Test, simultaneously check the following:
Does the Coin Meter count satisfactorily?
Does the coin drop into the cashbox correctly?
Is the coin rejected when inserted while keeping the REJECT Button pressed down?
12-1 FIG 2
Insert a coin while keeping
the REJECT Button pressed
d o w n a n d c h e c k i f i t i s
rejected.
12-1 FIG 3
CRADLE
12
73