5
Remove the (4) M4x16 SKT CAP SCR from both Left and Right End Caps and remove.
10
6
Remove the (6) M6x25 SKT CAP SCR from both Left and Right ends of the Control Panel.
7
Once all fixings have been removed, carefully raise the Control Panel Base
Note: Take care whan reassembling not to trap any wires. Use one person to lower the Control Panel Base and
another to steady the Levers.
60
M4x16 SKT CAP SCR
(4)
End caps
(2)
Control Panel Base
M6x25 SKT CAP SCR
(6)