Sega MARIO & SONIC AT THE RIO 2016 OLYMPIC GAMES Owner's Service Manual page 42

8
Lower the Leg Adjusters and raise the ASSY FLOOR to a height whereby the gap between the ASSY
FLOOR and the underside of the cabinet is closed completely.
THE FLOOR HEIGHT MUST BE ADJUSTED SO THAT THE GAP BETWEEN THE FLOOR
AND THE UNDERSIDE OF THE CABINET HAS CLOSED. LEAVING A GAP BETWEEN THE
FLOOR AND THE UNDERSIDE OF THE CABINET MAY INDUCE A TRAP HAZARD OR
POSSIBLE INJURY TO PLAYER.
9
Once the ASSY FLOOR is in position, lock the Leg Adjusters by raising the "Lock Nut".
10
Once the ASSY FLOOR has been raised and the gap between the ASSY FLOOR and the underside of the
cabinet has been closed. Secure the ASSY FLOOR to the cabinet by tightening the (6) M8x20 SKT
CAP SCR applied in Step 6.
Align the FLOOR PLATE with the CONTROLLER CABINET
Be sure that the gaps between cabinet and floor are closed.
Socket Head Cap Screw
Raise the Locking
Nut and tighten
M8x20
6
29