Sega MARIO & SONIC AT THE RIO 2016 OLYMPIC GAMES Owner's Service Manual page 53

• When inserting or removing a connector, always hold it by its main part. If you
hold it by anything else while doing so, the connections between wire and
connector terminal fixtures could be damaged; and there could be a short
circuit or fire. There could also be poor connectivity.
• Do not move unit with the adjusters in contact with the floor. Otherwise parts
7
might be damaged or deformed and there might be accidents.
• Whenever any fasteners (e.g. screws, nuts) have been lost, always use
replacement fasteners with proper dimensions as specified in this manual. If
fasteners of any other dimensions are used, it could cause damage and/or
separation of parts that result in secondary accidents.
• Do not place the cabinet on inclines or uneven surfaces. This could result in the
unit falling over.
• Check surroundings carefully while moving the unit. If you should get caught
between the unit and a wall, for instance, there could be a serious accident.
• Have on hand a number of workers appropriate for each task that needs to be
done. Make calculations by approximating that one worker can lift roughly
15 kg of weight. If an insufficient number of workers try to lift a heavy object,
it could result in a worker stumbling and the object being dropped, crushing
someone or something underneath. Workers could also injure their backs, etc.
• When lifting a heavy object, be sure to carefully consider the area where it
will be lifted. If possible, lift the object by its handles or base. If weak fasteners
or fragile parts are gripped, they could be damaged under the weight of
the object, and this could result in a worker stumbling and the object being
dropped, causing personal injury.
• Never disassemble the unit in ways other than those described in this manual.
Doing so can cause accidents such as electric shocks, short circuits, and fires.
• Do not attempt to tilt the unit to fit it through narrow doorways. Moving the unit
while it is tilted can result in an accident. It can also cause deformations and
damage to parts, as well as deviations of fastening positions, which could
result in accidents during operation.
• If moving through a door or places that may become narrow, i.e corridors or
places which have low ceilings such as an elevator, you should remove the
billboard.
40