Novusun CNC NVCM Series Manual page 29

one or more workpiece coordinate system.
1 、 Move to current working piece 0 point
Firstly hold down the material,use keyboard or pendant to move tool tip at the 0 point,so this
0 point is the working piece 0 point,it related with the working G code file,so the user must be very
familiar to his own working G code.As our example shows,the 0 point is on the center of the
working piece surface,so we just move the tool tip to this position.
2 clear Coordinate
、
As 5-5 shows,press Zero button on each axis, then clear to 0 for each axis.After operation,the
result shows as Figure 5-6.
Manual of NVCM
Figure5-5. Press Zero on each axis,all clear to 0
- 27 -