Toshiba B-EX6T Series Key Operation Specification page 74

[Description 3] Auto unlock function
Note: Only when "ON (ACCESS PASSWORD)" is selected for TAG CHECK
[Values to be printed 3]
OFF: Disabled.
ON: Enabled.
MULTI WRITE [ ]
[Description] Multi-word write *This setting is valid if RFID module Z is #20A or later
[Values to be printed]
OFF: Disabled.
ON: Enabled.
CALIB. MODE [ ]
[Description] RFID calibration function
[Values to be printed]
OFF: Disabled.
ON: Enabled.
CALIB. AGC [ ]
[Description] Optimum AGC value obtained through RFID calibration
[Values to be printed]
0 to 15
CALIB. POSITION [ ]
[Description] Distance to the optimum read/write position obtained through RFID calibration
[Values to be printed]
-999.9mm to +999.9mm
ANTENNA POSITION [ ]
[Description] Combinational position of the RF antenna and the wave director
[Values to be printed]
FRONT: Front
CENTER: Center
REAR: Rear
SUCCEEDED TAGS
[Description] The number of times data write succeeded
[Values to be printed]
0 to 9999999
VOID PRINT TAGS
[Description] The number of times data write failed
[Values to be printed]
0 to 9999999
73