Tone Adj. <D - Toshiba B-EX6T Series Key Operation Specification

value exceeds the print head rating, it is automatically corrected.
3. The factory default is +0step.
B-EX4T1
Max.
Min. value
value
+10 -20
Remarks:
1. Setting a value in the positive (+) direction, the print tone becomes darker. And, setting a value in the
negative (-) direction, the print tone becomes lighter.
+10 ← (Darker) ← 0 → (Lighter) → -20
2. The print tone fine adjustment value (thermal transfer) is the sum of the fine adjustment values set in the
system mode (by key operation) and set by command (from the PC). The max. value is -20 ~ +10. If the
value exceeds the print head rating, it is automatically corrected.
3. The factory default is +0step.
9.5.27 TONE ADJ. <D>
B-EX6T1/T3
Max.
Min. value
value
+20 -20
Remarks:
1. Setting a value in the positive (+) direction, the print tone becomes darker. And, setting a value in the
negative (-) direction, the print tone becomes lighter.
+20 ← (Darker) ← 0 → (Lighter) → -20
2. The print tone fine adjustment value (direct thermal) is the sum of the fine adjustment values set in the
system mode (by key operation) and set by command (from the PC). The max. value is -20 ~ +20. If the
value exceeds the print head rating, it is automatically corrected.
3. The factory default is +0.
B-EX4T
Max.
Min. value
value
+10 -20
Remarks:
1. Setting a value in the positive (+) direction, the print tone becomes darker. And, setting a value in the
negative (-) direction, the print tone becomes lighter.
+10 ← (Darker) ← 0 → (Lighter) → -20
2. The print tone fine adjustment value (direct thermal) is the sum of the fine adjustment values set in the
system mode (by key operation) and set by command (from the PC). The max. value is -20 ~ +10. If the
value exceeds the print head rating, it is automatically corrected.
3. The factory default is +0.
Step Display
1 Decimal
Step Display
1 Decimal
Step Display
1 Decimal
Integer Decimal
Sign
digit
Exist 2
Integer Decimal
Sign
digit
Exist 2
Integer Decimal
Sign
digit
Exist 2
95
Unit of
0-padding
place measure
0 None
Unit of
0-padding
place measure
0 None
Unit of
0-padding
place measure
0 None
Step
Step
Step