Auto Diagnostic - Toshiba B-EX6T Series Key Operation Specification

9.4.2 AUTO DIAGNOSTIC

The procedure for printing the self-diagnosis result is the same as that for the maintenance counter/parameter
setting data described in 9.4.1 MAINTENANCE COUNTER.
The following table shows the menu structure from top menu of the system mode to AUTO DIAGNOSTIC.
The menu structure of AUTO DIAGNOSTIC
Menu item
<1>DIAGNOSTIC
AUTO DIAGNOSTIC
THERMAL TRANSFER
NO
YES
DIRECT THERMAL
NO
YES
DISPLAY
Note:
When an error occurs while printing, the error message is displayed, the ERROR LED turns on, and the
ONLINE LED turns off. Though the error can be cleared by pressing the [ENTER], [CANCEL] or [MODE] key,
the printer does not reprint the label automatically.
9.4.2.1 AUTO SELF-DIAGNOSIS PRINTOUT
B-EX6T1/T3
PROGRAM B-EX6T1-T
MODEL B-EX6T1-TS18-CN-R
PRINTER S/N 2317A232688
MAIN XXXXXXXXX V1.0
BOOT XXXXXXXXX V1.0B :0000
XML XXXXXXXXX V1.0
WLAN XXXXXXXXX V1.0A :4300
FONT AE00
ZFONT 7600
KANJI GOTHIC :C300
MINCHO :1F00
CHINESE :F700
EEPROM 256B
SDRAM 32MB
SENSOR1 00000000,00000111
SENSOR2 [H]23ﾟC [A]22ﾟC
[R]4.2V [T]2.5V [E]0.6V
PE LV. [R]1.8V [T]2.5V
M THRE. [R]1.8V [T]2.5V
HEAD [RANK]7
LAN MAC 11-22-33-44-55-66
EXP.I/O NG
EX.232C NG
SIO NG(0111)
RFID OK #00RV972 (EU0) R01
WLAN OK Ver1.1.3
MAC 00-11-22-33-44-55
RTC NG
USB MEMORY NG
BASIC M Z-EX4T1—M13 V1.3:02DC
BASIC S Z-EX4T1—S11 V1.1:BF1E
:F100
:6700
305DPI
75
Note:
"°" (degree) of "xx°C" may not be printed correctly,
depend on the type of code page.