Firewall Settings - Siemens MindConnect Nano Getting Started

Appendix
A.4 Firewall Settings
Ambient conditions
min.
max.
Relative humidity
Relative humidity
Vibrations
Vibration load in operation
Shock testing
Shock load during operation
Software
MindConnect Software
Dimensions
Width
Height
Depth
A.4

Firewall Settings

It is recommended to use a firewall between the Internet and the MindConnect Elements,
this is also recommended for communication to the automation network.
In the direction to Automation Network a firewall supporting NAPT (in case of DMZ, see
section "List of abbreviations") or supporting the "Ghost-Mode" is required. Siemens offers
many types of Firewalls for fulfilling these requirements.
86
0 °C
50 °C
Tested according to IEC 60068-2-78
·
IEC 60068-2-30: Operation: 5 % to 85 % at 30 °C (no condensation)
·
storage / transport: 5 % to 95 % at 25 / 55 °C (no condensation)
·
Tested according to IEC 60068-2-6: 5 Hz to 9 Hz: 3.5 mm; 9 Hz to 200 Hz: 9.8 m/s²
Tested according to IEC 60068-2-27: 150 m/s², 11 ms
Pre-installed MindConnect Software
144 mm
90 mm
53 mm
Getting Connected to MindSphere
Getting Started, 05/2018