Siemens MindConnect Nano Getting Started page 23

Figure 4-5
The following table shows the meanings of the LED lights:
LED-Name
PC ON/WD
L1-RUN/STOP
L2 - ERROR
L3 - MAINT
You can find more information about LED errror codes in section Troubleshooting (Page 26).
Getting Connected to MindSphere
Getting Started, 05/2018
LED lights - bottom view 2
Status Description
GREEN Power on
ORANGE System restart
ORANGE
·
·
For explanation of possible problems and respective solution, please
refer to the chapter "Troubleshooting".
Blinking ORANGE Connection to MindSphere is being established.
Blinking GREEN Onboarding is in progress.
GREEN MindConnect Nano is onboarded to MindSphere.
Blinking ORANGE Firmware update active.
ORANGE
·
For explanation of possible problems and respective solution, please
refer to the chapter "Troubleshooting".
Blinking RED
·
For explanation of possible problems and respective solution, please
refer to the chapter "Troubleshooting".
RED Firmware update error
Blinking ORANGE USB stick is active:
·
ORANGE Onboarding failed:
·
Blinking RED
·
For explanation of possible problems and respective solution, please
refer to the chapter "Troubleshooting".
Mounting and installing MindConnect Elements
4.4 LED lights of MindConnect Elements
No connection to proxy·
No connection to MindSphere
No connection to the datasources
Data loss
Installing USB configuration
Configuration file on the USB stick is not valid
USB stick Error
23