5. Enter datapoint data.
Note
· The units and data types specified here will need to match exactly with the aspects
· The protocol datatypes specify the Datapoint Address. You can find additional
6. Confirm with "Accept".
7. To save the added datapoint in "Edit Mode" click "Save".
Result
The new datapoint is available at the datasource.
Getting Connected to MindSphere
Getting Started, 05/2018
and variables. If they are different, the aspect cannot be connected to the datapoint.
information on protocol datatypes in the chapter Overview of datatypes.
Configuring data in Asset Manager
7.3 Adding a datasource and datapoints
61