Siemens MindConnect Nano Getting Started page 54

Configuring data in Asset Manager
7.1 Creating aspects and variables
Procedure
To add an aspect type in Asset Manager, e. g. "Generator", follow these steps:
1. On the start screen click "Aspects".
2. To create a new aspect click
3. Enter your Tenant ID for the aspect, e. g. "idevdoc.generator".
Note
All custom aspects and types must be named as "<TenantID>.xxx"
4. Enter a name and describtion for the aspect e. g. "Generator".
5. Follow these steps for each variable, e. g. "RotationSpeed":
– Enter variable data.
Figure 7-1
– Click "Add variable".
6. Confirm with "Save".
54
Note
· The units and data types specified here will need to match exactly(also case
sensitive) with the physical data source.
Variabledata
.
Getting Connected to MindSphere
Getting Started, 05/2018