Safety Notes; General Safety Instructions - Siemens MindConnect Nano Getting Started

Safety Notes

1.1

General safety instructions

Life-threatening voltages are present with an open control cabinet
When you install the device in a control cabinet, some areas or components in the open
control cabinet may be carrying life-threatening voltages.
If you touch these areas or components, you may be killed by electric shock.
Switch off the power supply to the cabinet before opening it.
System expansions
NOTICE
Damage through system expansions
Device and system expansions may be faulty and can affect the entire machine or plant.
The installation of expansions can damage the device, machine or plant. Device and
system expansions may violate safety rules and regulations regarding radio interference
suppression. If you install or exchange system expansions and damage your device, the
warranty becomes void.
Note the following for system expansions:
Only install system expansion devices designed for this device. Contact your technical
support team or the team where you have purchased your PC to find out which system
expansion devices may safely be installed.
Observe the information on electromagnetic compatibility (EMC). Refer to the chapter
Technical specifications of MindConnect Nano (Page 81)/Technical specifications of
MindConnect IoT2040 (Page 84).
NOTICE
"Open Type" UL508
Note that the device is classified as "Open Type" for use in the area of Industrial Control
Equipment (UL508).
Installation of the device in an enclosure complying with UL508 is a prerequisite for
approval or operation in accordance with UL508.
Getting Connected to MindSphere
Getting Started, 05/2018
WARNING
1
5