Maintenance And Care; Maintenance - probst SH-1000-MINI Operating Instructions Manual

Maintenance and care

7 Maintenance and care
7.1

Maintenance

To ensure the correct function, safety and service life of the device the following points must be executed in the
maintenance interval.
Used only original spare parts, otherwise the warranty expires.
All operations may only be made in unpressurised, electro less and closed state of the device!
The device must be installed and maintained by qualified personnel such as mechanics and electricians only.
After each repair or maintenance job check the safety equipment as described in the "Safety" chapter.
MECHNICAL
SERVICE INTERVAL
First inspection after
25 operating hours
After 50 operating hours
Minimum 1x per year
(at rough conditions shorten the
interval)
HYDRAULIC
Service interval
First inspection after
25 operating hours
All 50 operating hours
5240.0020
Maintenance work
•
Control and tighten all screws and connections.
(The implementation is only allowed by an expert).
•
Tighten all screws and connections (take care that the tightening torques
according to the property class of the screws are observed).
•
Check all joints, bolts, guidance's and gears for correct function, if necessary
adjust or replace it.
•
Check of all the suspension parts, bolts and straps. Check for corrosion and safety
by an expert.
Maintenance work
•
Control and tighten all hydraulic thread joints and connection.
(The implementation is only allowed by an expert).
•
Tighten all hydraulic connections.
•
Check the hydraulic system for leaks.
•
Check the hydraulic oil filter, clean it if necessary (if available).
•
Check the hydraulic oil and replace it in accordance to the manufacturer
information (recommended hydraulic oil: HLP 46 according to DIN 51524 – 51535).
•
Check the hydraulic hoses for breaks and abrasion.
Only specified types of oil may be used!
V4
30 / 34
GB