Setup Of Bluetooth Communication; Getting Help - Fluke Biomedical RaySafe Xi 8201011 User Manual

RaySafe Xi User Manual – RaySafe Xi View
There are two ways for the RaySafe Xi to communicate with a PC:
Via the RS-232 cable to the PC. If the PC has only USB ports, the supplied standard adapter
converting RS-232 to USB must be used.
Via a Bluetooth module connected directly to the RaySafe Xi serial port. A PC with built-in or
external USB Bluetooth normally works after the required setup procedure.

SETUP OF BLUETOOTH COMMUNICATION

1. Follow the instructions enclosed with the PC's internal or external Bluetooth device.
2. Insert the Bluetooth module into the RaySafe Xi base unit's RS-232 port and turn on the base unit.
3. Go to the Bluetooth icon in the Windows Control Panel. Select a menu called "Add Bluetooth device" or
similar.
4. The PC will scan for available Bluetooth devices and will find "Xi slave". Add this device.
5. When prompted enter the passkey for the Xi slave which is "1234".
6. The installation procedure will finish. Please note the number of the COM port assigned to the instrument.
7. Start RaySafe Xi view and go to File – Settings and enter the correct COM port. Press the Start button and
"Started waiting for data" will appear in the bottom left corner of the screen.
8. Go to the SETUP MENU of the instrument and select the INFO option. Scroll until "Xi view test" appears
and press SELECT. Test data should now appear on the RaySafe Xi view screen.

GETTING HELP

A complete manual for RaySafe Xi view can be found in the Help menu.
40