How To Measure Ct Kvp - Fluke Biomedical RaySafe Xi 8201011 User Manual

RaySafe Xi User Manual – CT Measurement
For positioning of the RaySafe Xi CT detector free in air, Unfors RaySafe recommends the use of the RaySafe
Flexi stand.

HOW TO MEASURE CT kVp

Position the RaySafe Xi R/F detector along the CT beam slice. Turn on the meter and select R/F high. Expose
without rotation i.e. in scout/tomogram/topogram mode, using no or slowest table movement.
1. SENSOR MENU
CT Dose
Press STEP to step between sensors and SELECT to select a sensor.
NOTE! When turning on the RaySafe Xi base unit with the RaySafe Xi CT detector connected,
"Stabilizing" will be displayed for a few seconds while the electronics are stabilizing.
Ion chamber sensor
21