Fluke Biomedical RaySafe Xi 8201011 User Manual page 24

RaySafe Xi User Manual – Light Measurement
2. MEASURE MODE
Luminance cd/m
Illuminance lux or fc
Press STEP when in MEASURE MODE to freeze and move the measured value to the second line of the
display. A new press on STEP will move a new measured value to the second line of the display. Store the
measured value (and send it via the RS-232 interface) in the RaySafe Xi memory by pressing SELECT. A
memory counter (Mem #) will be displayed at the very bottom of the display.
BARCO
STEP •
3. SETUP MENU
Press SELECT to enter the SETUP MENU (from MEASURE MODE) and STEP to step between setup
parameters.
or fL
2
STEP •
24