Victron energy Color Control GX Manual page 42

Hide thumbs Also See for Color Control GX:

Last update: 2020-08-19 12:10

When using Ethernet and State shows 'Unplugged', verify that the Ethernet network cable is not

faulty: try another one. The two lights at the back of the CCGX, where the Ethernet RJ45 cable plugs

in, should be lit or blinking. Two dead lights indicate a connection problem.

WiFi

When using Wi-Fi and the menu shows 'No Wi-Fi adapter connected' check the USB connection to the

Wi-Fi dongle. Try to remove the dongle and insert it again.

When using Wi-Fi and the State shows 'Failure', it might be that the Wi-Fi password is incorrect. Press

'Forget network' and try to connect again with the correct password.

Step 3. Verify VRM Portal Connectivity

Navigate to Settings → VRM online portal, and check the Connection error status:

https://www.victronenergy.com/live/

ccgx:start https://www.victronenergy.com/live/ccgx:start?rev=1597831811

Printed on 2020-11-10 02:37

Table of Contents

Need help?

Do you have a question about the Color Control GX and is the answer not in the manual?

Ccgx