Advertisement
2020-11-10 02:37
Redetect system
Redetects the type of inverter/charger and its features & configuration. Use this feature when, for
example, a VE.Bus BMS used to be part of a system, and is no longer.
System reset
Restarts the inverter/charger when it has stopped retrying. For example after a (very) heavy overload;
or three overloads in a row.
ESS Relay test
Shows the status of the ESS Relay test. Only relevant when its an ESS system. See Q9 in the
Manual FAQ
for details
4 DVCC - Distributed Voltage and Current Control
4.1 Introduction and features
Enabling DVCC changes a GX device from a passive monitor into an active controller. The available
features and effects of enabling DVCC depend on the type of battery used. The effect also depends on
the installed Victron components and their configuration.
Example 1 - Managed CAN-bus batteries For example, in systems with an Managed CAN-bus BMS
Victron Energy - https://www.victronenergy.com/live/
31/58
Color Control GX manual
ESS
Advertisement
Need help?
Do you have a question about the Color Control GX and is the answer not in the manual?
Questions and answers