Configurable Parameters - Victron energy Color Control GX Manual

Last update: 2020-08-19 12:10
2 Configuration
2.1 Configurable parameters
After completing the installation and setting up the internet connection (if required), go through the
menu from top to bottom to configure the CCGX:
Item Default Description
General
Remote
Off Enable this to allow Victron engineers to access your system in case there is a problem.
support
User and
Access level Set this to 'User' to prevent accidental and unwanted changes to the configuration.
installer
Audible alarm On When there is an alarm on the CCGX or a connected product, the CCGX will beep - unless this setting is set to 'Off'.
Turn 'On' to demonstrate product and installation features to a client or at an exhibition. This simulation mode will allow
Demo mode Off
better understanding without (yet) changing any settings.
Firmware
Online Check
We recommend the factory default. A reason to disable it would be to eliminate the risk of a firmware update causing
updates: Auto and
problems.
update update
Online
Latest Use the default setting unless you want to participate in test versions. End-user systems should certainly be set to 'Latest
updates:
release release'.
Update to
Use this menu to install a new version from a microSD card or USB stick. Insert the card or stick that holds the new
Offline updates
firmware .swu file.
Stored backup firmware With this feature you can go back to the previously installed firmware version.
Date & time
Automatic
Date/Time When connected to the internet, time will be automatically synchronised regardless of this setting. Toggle the setting
from
local Manually input the time where no internet connection is present.
internet
Change time
Select the correct time zone.
zone
Remote
console
Disable
password Password authentication not required for remote console access.
check
Enable
password Choose password to allow remote console access.
check
https://www.victronenergy.com/live/
ccgx:start https://www.victronenergy.com/live/ccgx:start?rev=1597831811
Printed on 2020-11-10 02:37