Victron energy Color Control GX Manual page 4

Hide thumbs Also See for Color Control GX:

Last update: 2020-08-19 12:10

1.3 Power

Power the device using the Power in V+ connector. It accepts 8 to 70 V DC. The device will not power

itself from any of the network connections. The supplied DC power cable includes an inline 3.15 A

slow blow fuse.

Powering in systems with VE.Bus BMS

When the CCGX is used in an installation with a VE.Bus BMS, connect the Power in V+ on the CCGX to

the terminal labelled 'Load disconnect' on the VE.Bus BMS. Connect both negative leads to the

negative stub of a common Battery.

A Cautionary word about Powering from the AC-out terminal of a VE.Bus Inverter, Multi or

Quattro:

If you power the CCGX from an AC adaptor connected to the AC-out port of any VE.Bus product

https://www.victronenergy.com/live/

ccgx:start https://www.victronenergy.com/live/ccgx:start?rev=1597831811

Printed on 2020-11-10 02:37

Table of Contents

Need help?

Do you have a question about the Color Control GX and is the answer not in the manual?

Ccgx