Advertisement
Last update: 2020-08-19 12:10
MODBUS Address: 1
Baud Rate: 9600
Data Format: 8N1 (10 Bit)
For further support related to configuration of the IMT Si-RS485 Series irradiance sensors please
contact IMT Solar
directly.
1.10.7 User Interface - GX Device
Upon connection to the Victron GX device and power up the IMT Si-RS485 Series irradiance sensor will
be automatically detected within a few minutes and appear in the 'Device List' menu.
Within the 'IMT Si-RS485 Series Solar Irradiance Sensor' menu all available parameters will be
automatically displayed (dependent on the sensors connected) and update in real time.
Within the 'Settings' sub-menu it is possible to manually enable and disable any optional/additional
external sensors that are connected to the IMT Si-RS485 Series irradiance sensor.
https://www.victronenergy.com/live/
ccgx:start https://www.victronenergy.com/live/ccgx:start?rev=1597831811
Printed on 2020-11-10 02:37
Advertisement
Need help?
Do you have a question about the Color Control GX and is the answer not in the manual?
Questions and answers