Tools Menu, Functions; 2�7 Tools Menu, Functions; 2�7�1 Info (5-1); General (5-1-1) - Husqvarna Automower 305 Technical Manual

2�7 Tools menu, functions
Via the Tools menu you can access data about
the mower's function, test functions and special
settings.
• Info (5-1)
Information about current status of
software, sensors, battery, loop signal etc.
• History (5-2)
Key data, which gives an overview of a
mower's age and function.
• Test (5-3)
Actively tests the mower's different
components and functions.
• Special settings (5-4)
Turn off loop detection, calibrate the tilt
sensor, demo mode*.
* Available in a more recent version of the software
than was available at the time of printing this edition
of the Technical Manual.
Timer
Installation
Security
Settings
Tools
2� SPECIAL MENU FUNCTIONS
Info
History
Test
Special settings
2.7.1 Info (5-1)
The values displayed in this sub-menu show the
current status of the mower's different sub-systems,
e.g. software, battery, motors and sensors. The
menu can be used in connection with e.g. trouble
shooting.
Info
History
Test
Special settings

General (5-1-1)

The sub-menu General shows:
• Main program type: In this case 305.
• MSW-version: The version of the MSW
(Main Software)program (also called the
main program), e.g. 1.00.00.
• MSW Date: Date of issue of MSW, in the
format YYYY-MM-DD.
• MMI-version: The version of the MMI (Man
Machine Interface)program, e.g. 1.00.00.
• SSW-version: The sub-system's program
version, e.g. 1.00.00.
• S/N: The mower's serial number. This
number must correspond with the serial
number on the mower's rating plate which
is located inside the display cover.
• Production: The mower's date of
manufacture in the format YYYY-MM-DD.
General
Battery
Loop
Sensors
Wheel motors
Blade motor
English - 19