Proportional Control Rate Slider; Remote Controller Setting - YUNEEC TYPHOON H3 User Manual

Proportional Control Rate Slider

The Proportional Control Rate Slider located on the right side of
the ST16S Ground Station allows you to set the overall climb/de-
High Speed
scend and directional control rates.
Fly low and slow initially. Slow (Low Speed) position, the lowest
Low Speed
control rates, is ideal for precision ight. High-speed (High
Speed) position is used when transiting broad areas.
Remote Control Setting
1. Open the remote control and wait for the remote control to start.
2. Click the settings button.
3. Turn on the remote control setting switch
to enter the remote control setting page
I.Mode switching
The factory default joystick mode is mode 2,
also this user manual is described in the
mode 2 joystick mode. The user can select
the mode according to his own operation
habits.
II.Hardware monitor function
Click the RC monitor key to open the remote
control hardware monitor
Under normal circumstances, when you
move the joysticks, knobs, switches on the
remote control, or press the button, or trim,
the monitor will have the corresponding
changes to display the input of the channel
currently being moved, so as to detect
whether the hardware input of the remote
control is normal.
25