1 General information
1.5 About this operating and installation instruction
Documentation of the combi oven
These operating and installation instructions must always be read in conjunction with the documenta‐
tion of the combi oven. Refer to the following documents for information on handling the combi oven
correctly:
Installation manual: Installing and putting the combi oven into service.
■
User manual: Operating the combi oven, cooking and regenerating
■
Purpose
These operating and installation instructions answer the following questions:
How can I use the hood?
How do I install the hood?
Who should read this manual
This operating and installation manual is aimed at the following groups:
Chef
■
User
■
Installation engineer
■
The target groups must have the qualifications listed in 'Requirements to be met by personnel' on
page 27.
Layout of the operating instructions
Chapter/section
General information
For your safety
Transport
Assembly and pre-in‐
stallation
Installation
Putting into service
Operation
Cleaning
Servicing
Removal from service
Technical data
Notation for decimal points
A decimal point is always used in order to achieve international standardization.
Operating and installation instructions
Purpose
Shows you how to identify your hood
■
Provides guidance on using this user and installation manual.
■
Specifies the intended use of the hood
■
Describes the hazards posed by the hood and suitable preventive actions
■
You should read this chapter carefully in particular.
Explains how to convey the appliance to the installation location
Specifies the requirements for the installation location
■
Explains the functions of the hood and shows the position of its compo‐
■
nents
Contains instructions for the work steps used to assemble and pre-install
■
the hood
Provides information on the electrical installation
Explains the procedure for putting into service
Contains instructions for the operating procedures used with the hood
Contains the cleaning instructions
■
Contains cleaning instructions
■
Contains the servicing schedule where relevant to the user
■
Contains maintenance instructions
■
Explains the procedure for removal from service
■
Contains disposal instructions
■
Contains the technical data and connection drawing
■
9