Hazards And Safety Precautions During Installation - Welbilt Convotherm 3432600 Operating And Installation Instructions

2 For your safety
2.6

Hazards and safety precautions during installation

Safety hazard: electrical power
Hazard
Risk of electric shock
from live parts
Risk of electric shock
from live parts
Safety hazard: Mechanical parts of the appliance
Hazard
Risk of cuts from sharp
edges
Operating and installation instructions
Where or in what situations does the
hazard arise?
All situations
Due to damage of cables during
■
transportation
Due to damage of cables through
■
improper assembly of the combi
oven's top box
When the top box of the combi
■
oven is removed for installation of
the control cable
When the control cable on the
■
combi oven is connected and the
cable ends are freely accessible or
when the cable is connected
During operation of the hood with
■
the hood casing not installed or re‐
moved
During operation of the hood with
■
the electrical box cover not instal‐
led or removed
On the hood and on adjacent met‐
■
al parts
On the hood and on adjacent met‐
■
allic accessories
Where or in what situations does the
hazard arise?
When handling sheet-metal parts
16
Preventive action
Work on the electrical system
■
must only be performed by quali‐
fied electricians from an author‐
ized service company
Professional working
■
Observe the 5 safety rules
■
Ensure that all of the connection ca‐
bles are undamaged and fixed se‐
curely
Switch off the power to the combi
■
oven and the hood when work is
done on the hood or the control
cable
Take protective measures at every
■
power switch to ensure that the
power cannot be switched on
again
Take special care for jobs that re‐
■
quire electrical power and must be
performed with the combi oven's
top box removed
Take special care for jobs that re‐
■
quire electrical power and must be
performed with the hood casing or
the electrical box cover removed
Always reinstall the hood casing and
electrical box cover before the pow‐
er to the hood is switched on again
Before putting the appliance into
service, make sure that the hood, in‐
cluding all metallic accessories, is
connected to an equipotential bond‐
ing system.
Preventive action
Exercise caution when performing
■
these tasks
Wear personal protective equip‐
■
ment