Hazards And Safety Precautions During Servicing - Welbilt Convotherm 3432600 Operating And Installation Instructions

2 For your safety
2.10

Hazards and safety precautions during servicing

Safety hazard: moving heavy weights
Hazard
Risk of injury from over‐
stressing your body
Safety hazard: electrical power
Hazard
Risk of electric shock
from live parts
Risk of electric shock
from live parts
Operating and installation instructions
Where or in what situations does the
hazard arise?
When lifting the hood
Where or in what situations does the
hazard arise?
All situations
Due to damage of cables through
improper assembly of the applian‐
ce's top box or through transporta‐
tion of the hood
When the hood's cover is open,
■
e.g. to replace fuses
When the top box of the appliance
■
is removed for installation of the
control cable
When the cable ends of the control
■
cable are freely accessible during
disassembly
During operation of the hood with
■
the hood casing not installed or re‐
moved
During operation of the hood with
■
the electrical box cover not instal‐
led or removed
On the hood and on adjacent met‐
■
al parts
On the hood and on adjacent met‐
■
allic accessories
21
Preventive action
Only with enough people or use
■
suitable aids
Do not exceed safety limits for lift‐
■
ing and carrying
Wear personal protective equip‐
■
ment
Preventive action
Work on the electrical system
■
must only be performed by quali‐
fied electricians from an author‐
ized service company
Professional working
■
Observe the 5 safety rules
■
Ensure that all of the connection ca‐
bles are undamaged and fixed se‐
curely
Switch off the power to the combi
■
oven and the hood when work is
done on the hood or the control
cable
Take protective measures at every
■
power switch to ensure that the
power cannot be switched on
again
Take special care for jobs that re‐
■
quire electrical power and must be
performed with the appliance's top
box removed
Take special care for jobs that re‐
■
quire electrical power and must be
performed with the hood casing or
the electrical box cover removed
Always reinstall the hood casing and
electrical box cover before the pow‐
er to the hood is switched on again
Before putting the appliance back in‐
to service, make sure that the hood,
including all metallic accessories, is
connected to an equipotential bond‐
ing system.