Engaging The Reduction Gearbox (Scarab Option Only); Disengaging The Reduction Gearbox (Scarab Option Only) - Scarab MERLIN Operating And Basic Maintenance Instructions

Engaging the reduction gearbox (scarab option only)

On vehicles fitted with a Scarab reduction gearbox, road speed of approximately 80% can be achieved when selected.
1. Vehicle engine Running. Parking brake ON, Neutral gear selected.
2. Depress the clutch and press the
vehicle is now in reduction drive mode.
If the reduction gearbox fails to engage the
and repeat the forgone procedure.
3. Select the appropriate sweeping equipment. Refer to Page 11, and the best suited gear ratio for the prevailing sweeping conditions.
Commence sweeping.

Disengaging the reduction gearbox (scarab option only)

1. With all sweeping equipment OFF and stowed, fan OFF. Vehicle Stopped. Parking brake On. Neutral selected.
2. Depress the clutch and press the
is now in normal drive mode.
If the reduction gearbox fails to engage the
and repeat the forgone procedure.
Part No. SCAZ038022 2.4.1
switch on the main control panel. The
symbol will flash, Press the
on the main control panel. The
symbol will flash, Press the
M
13
Operating Instructions - Unidrive Truckmounted Road Sweeper
symbol on the LCD screen will change to the
M
again to restore normal drive. Move the vehicle slightly forward
symbol On the LCD screen will change to the
again to restore normal drive. Move the vehicle slightly forward
symbol. The
symbol. The vehicle
M
E&OE