Table of Contents
Advertisement
Spare and Wearing Parts, Accessories
12 Spare and Wearing Parts, Accessories
12.1 Spare and wearing parts
Maintenance work may only be carried out by qualified personnel.
4 WARNING! Risk of injury due to improper maintenance! After performing any maintenance or re-
pair work, check that the system is functioning correctly, particularly the safety features.
NOTE
Incorrect maintenance work
Damage to the ejector!
4 Always switch off the supply voltage before carrying out maintenance work.
4 Secure it so that it cannot be switched back on.
4 The ejector must be operated only with a silencer and press-in screen(s).
The following list contains the most important spare and wearing parts.
Part no.
10.02.01.01450
10.02.01.01517
Legend:
•
Wearing part = W
•
Spare part = S
4 When tightening the fastening screws on the silencer module, observe the maximum tightening
torque of 0.5 Nm.
When you replace the silencer insert, we recommend that you also replace the insulating plate.
12.2 Accessories
Part no.
Designation
21.04.05.00211
Connection cable
21.04.05.00080
Connection cable
21.04.05.00207
Connection cable
21.04.05.00158
Connection cable
10.02.02.03490
Connection distributor
10.02.01.01397
SEP HV 3 16 22
10.02.01.01631
SEP HV 3 20 22
10.02.01.01514
SHC 3 22
10.02.01.01810
SHC 3 22
10.02.01.01831
SD 29x121.5 SHC
10.08.02.00300
STV-GE, 1/2" external
thread, 14
10.08.03.00162
ST, 1/2" external
thread, 13 MS-V
34 / 40
Designation
ERS-SET SEP-22 6xRUE-KLAP
Silencer (round)
SD 29x70 SHC 22
Legend
S
W
Note
M12, 5-pin socket, to 5-pin M12 connector, 2 m
M12, 5-pin, with open end, 5 m
WB-M12-5 5000 K-5P, PUR, angled
B-M12-5 1000 S-M12-5, 1 m
M12, 5-pin, to 2xM12, 4-pin
Ejector module, multi-stage nozzle, for SCPS...3-16
Ejector module, multi-stage nozzle, for SCPS...3-20
Holder cap for SCPS...3-16
Holder cap for SCPS...3-20
Silencer, reinforced (round)
Plug-in screw union, straight, for SCPS...3-16
Hose sleeve, for SCPS...3-20
EN-US · 30.30.01.02636 · 00 · 01/21
Advertisement
Table of Contents
