Table of Contents
Advertisement
Setting Up the 86122A
N O TE
Table 4
WARN IN G
20
Step 3. Configure for Bench Top or Rack
Mount Use
The 86122A is shipped ready for bench top use. To configure the
instrument for rack mount use, follow the steps below.
You must have a rack mount kit to continue with this procedure.
"Accessories" on page
1 Ensure that the rack mount kit is complete.
If any items are damaged or missing from the kit, contact the nearest Agilent
Technologies sales or service office to order a replacement kit. Items within
the kit are not individually available.
Qty
2
6
4
2
2 Remove the side trim strips.
3 Attach rack mount flange with three screws per side.
Use only the screws the come with the rack mount kit. Longer
screws may damage the instrument, and shorter screws may be
unsafe.
4 Remove feet before rack mounting
General Safety Considerations
16.
Description
Rack Mount Flange
Screws
Dress screws
Front Handle Assembly (86122A-1CP only)
Agilent 86122A Multi-Wavelength Meter, Second Edition
Refer to
Advertisement
Table of Contents
