Table of Contents
Advertisement
Using the 86122A
80
Select the Sweep Mode
• Press
to initiate one measurement sweep. This is useful if you want
the data to remain static for saving results or printing.
• Press
to continuously measure the input spectrum. In this mode, a
measurement sweeps occurs approximately every 0.5 seconds. This is useful if
you want the data to be continuously updated.
You can also set up data logging to perform measurement sweeps at any
desired interval. The green SWP indicator in the lower right-hand corner is
lit when a measurement is being acquired.
Agilent 86122A Multi-Wavelength Meter, Second Edition
Making Measurements
Advertisement
Table of Contents
