Agilent Technologies 86122A User Manual page 70

Using the 86122A Front Panel Buttons
Press this button to return the instrument to its factory default conditions.
The exceptions are
• GPIB address
• references
• Printout type
• OSNR user wavelength
• Don't Show this Dialog on Startup check box
Press this button to exit the current measurement application and initiate
an auto-measurement sequence.
Press this button to open the Setup toolbar. You can then modify a variety
of measurement and display setup functions.
Press this button to open the Data View toolbar. You can then configure
the tabular display as desired.
Press this button to open the Applications toolbar. You can then select
your desired measurement application.
Press this button to place the instrument in single sweep mode and initiate
a single sweep of the instrument.
Press this button to place the instrument in continuous sweep mode and
initiate sweeping.
Press this button to open the dialog box. Select a file name
Save Meas Data
and click .
Save
Press this button to open the dialog box. Select the Default
Print Setup
Printer and Printout Type, and click .
Print
70
Agilent 86122A Multi-Wavelength Meter, Second Edition