Warnings And Regulatory Information - Zip HydroTap G4 Installation Instructions Manual

801525UK G4 Commercial chilled only installation instructions - June 2016 - V2.04

Warnings and regulatory information

Warnings
• The Zip HydroTap
connection from each exposed metal part must be less than 1Ω.
• All installation and service work must be completed by trained and
suitably qualified tradespeople. Faulty operation due to unqualified
persons working on this product, or any other Zip product may void
warranty coverage.
• As the installer, it is your responsibility to supply (if necessary)
and install all valves as required by local regulations and relevant
standards.
• The HydroTap G4 is rated for 230V 50Hz AC operation.
®
• Do not remove the cover of the appliance under any circumstances
without first isolating the appliance from the power supply.
• Never locate the Command-Centre
• Do not expose the Zip HydroTap
• Due to the process of continuous improvement, Zip Water UK reserves
the right to change details mentioned in this manual, without notice.
• Visit www.zipwater.com/uk to ensure you have the latest copy of this
document.
G4 must be earthed. The resistance of the earth
®
near, or clean with water jets.
TM
G4 to the elements of nature.
®
Page 7 of 16