Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zip 801525
Summary of Contents for Zip 801525
-
Page 1: Step
Installation Instructions Zip HydroTap G4 ® Filtered Chilled drinking water for commercial kitchens and tea rooms. Chilled Commercial Affix Model Number Label Here 801525 801525 - Chilled HydroTap Installation Instructions - March 2016 - v3.00 Page 1 of 16... -
Page 2: Step
For all operational features of the HydroTap, please refer to the Chilled User manual No.801623. Classic Tap Arc / Cube Tap Elite Tap Celsius Arc / Cube Tap Page 2 of 16 801525 - Chilled HydroTap Installation Instructions - March 2016 - v3.00... -
Page 3: Table Of Contents
4.2- Filter flush ........................13 Trouble Shooting Trouble Shooting Table ........................ 14 End of life disposal ........................14 Notes ............................15 Contact details ..........................16 801525 - Chilled HydroTap Installation Instructions - March 2016 - v3.00 Page 3 of 16... -
Page 4: Installation Checklist
Flush the supply line before connecting. Connect and turn on the water to check for leaks. Flush the filter. Where applicable, programme the unit to suit the customer’s requirements. Page 4 of 16 801525 - Chilled HydroTap Installation Instructions - March 2016 - v3.00... -
Page 5: General Product Features
General Product Features Thank you for purchasing a Zip Chilled HydroTap. Please read and follow these instructions carefully to ensure safe operation and trouble free service. If service is required, please call 1800 460 222 What is the Zip HydroTap ? The Chilled HydroTaps are electronically controlled to supply filtered and Chilled drinking water for kitchens and tea rooms. -
Page 6: Important Safety Instructions
Lifting Take care when lifting the Zip HydroTap unit. Some units may exceed safe lifting limits. If you feel this is beyond your personal capabilities, please seek assistance with the lift. The weights of the units are marked on the packaging. -
Page 7: Warnings And Regulatory Information
336 x 476 x 335 Stainless CHA175 1x10A 0.300 336 x 476 x 335 Stainless ** Add an extra 3 kg when full of water 801525 - Chilled HydroTap Installation Instructions - March 2016 - v3.00 Page 7 of 16... -
Page 8: Technical Specification
• Jig saw for ventilation cut outs Section 1 Tap Installation Fit the tap to the benchtop or sink before installing the undersink unit. Refer to the tap installation book 803341 Page 8 of 16 801525 - Chilled HydroTap Installation Instructions - March 2016 - v3.00... -
Page 9: Section 2 - Ventilation
/or door vent systems. **Note: Inlet and outlet vents should be separated by a Min 100mm, to avoid hot air recirculation. IMPORTANT: See section 3 for clearances. 801525 - Chilled HydroTap Installation Instructions - March 2016 - v3.00 Page 9 of 16... - Page 10 (Option 1) or on the side of the cupboard (Option 2). Side outlet vent (Option 2) Front inlet vent Door outlet louvre Warm Air OUT (Option 1) Cool Air IN Page 10 of 16 801525 - Chilled HydroTap Installation Instructions - March 2016 - v3.00...
-
Page 11: Section 3 - Undersink Unit Installation
35 mm 336mm 400 mm Note: The tube lengths are matched to the pumps performance and therefore CANNOT be lengthened 801525 - Chilled HydroTap Installation Instructions - March 2016 - v3.00 Page 11 of 16... -
Page 12: Model Cha125 And Cha175
- Plug and Cord length is 1800mm Position the under sink unit close to the outlet tap, within reach of the hose and cord lengths supplied Page 12 of 16 801525 - Chilled HydroTap Installation Instructions - March 2016 - v3.00... -
Page 13: Section 4 - Commissioning
NOTE: For any subsequent fi lter changes or any operational procedures, please refer to the HydroTap User Manual, located inside the fi lter housing access door. 801525 - Chilled HydroTap Installation Instructions - March 2016 - v3.00 Page 13 of 16... -
Page 14: Trouble Shooting
Flow Sensor Fault Internal fault Call Zip Service Call an electrician, a plumber, or Zip for a free call in Australia on 1800-638-633 for assistance, service, spare parts or enquiries. End of Life Disposal In order to help preserve our environment we ask that you dispose of this product correctly. Please contact your local city council for collection centre details. -
Page 15: Notes
Notes 801525 - Chilled HydroTap Installation Instructions - March 2016 - v3.00 Page 15 of 16... -
Page 16: Contact Details
WMKA00099 AS 3498 The standard glass is 200 ml (7 fl oz). The terms “Zip” and “HydroTap” are registered trade marks of Zip Heaters (Aust) Pty Ltd. Zip products described in this publication are manufactured under one or more of the following patents: AU675601, AU637412, AU635979, GB0422305, GB2065848, US4354049, US5103859, US5099825 and SA2006/08043.