Dismantling Instructions; General Information; Leaf - Mellanox Technologies MIS5600Q-10DNC Dismantling Manual

Rev 1.1
1

Dismantling Instructions

This document provides detailed instructions for dismantling the InfiniBand chassis switch
systems. Follow the instructions in the order they are presented.
1.1

General Information

The switch system is assembled using screws, and modules with handles, snaps and latches.
To disassemble the switch system parts you will need a small Philips screwdriver and a
medium slotted screwdriver. A screw gun is highly recommended as the larger chassis can
have more than 300 screws.
The pictures displayed in the following pages provide visual guidance explaining how to
remove the modules from the mechanical base.
Chassis switch systems are comprised of:

Leaf modules located on the front side

Spine modules located on the rear side

Management modules

Fan modules

Power supply modules

Chassis body
1.2

Leaf

There are up to 36 leaf modules located on the front side of these products.
The Leaf module is removed from the chassis using snap handles.
6
Dismantling Instructions