Wafer Connector For Optional Usb Dongle (Cn6); Connectors - AXIOMTEK MVS100-323-FL User Manual

1.6.2

Wafer Connector for optional USB dongle (CN6)

The wafer connector is used for the internal USB dongle.
1.7

Connectors

Connectors connect the board with other parts of the system. Loose or improper connection
might cause problems. Make sure all connectors are properly and firmly connected.
Here is a table summarizing all connectors on the board.
Connector
MINI Card slot for storage (mSATA signal)
LAN
USB 3.2 Gen1
VGA connector
DC-in power connector
HDMI connector
ATX Power on/off button
4-Pin terminal connector for LED lighting control
12-Pin terminal connector for vision I/O
COM x1 (RS232/422/485)
PD power indicator & GigE1/GigE2 connector (PoE function)
Introduction
MVS100-323-FL User's manual
Section
1.7.1
1.7.2
1.7.3
1.7.4
1.7.5
1.7.6
1.7.7
1.7.8
1.7.9
1.7.10
1.7.11
9