Headset Specifications - Orbea ORDU OMX Technical Manual

18 | ORBEA
Di2 and EPS compatibility
Through handlebar, extensions, bridge, frontpost, stem, headset and frame
Cable routing
Front brake
Front rotor diameter
Rear brake
Rear rotor diameter
(Chainstay height = 20mm)
Bottle holder
Storage
Hydration systems compatibility
Food storage compatibility
Mudguards compatible
Rack compatible
Kickstand compatible
Childseat compatible
Trailer compatible
Powermeter compatibility**
UCI legal
* Not all calipers and rotors in the market are compatible with all frames.
befores purchasing.
** For other powermeters, consult the compatibility and dimensions with the manufacturer.
*** Consult the food and hydration systems characteristics with the manufacturer for their compatibility with Ordu OMX.
TECHNICAL MANUAL
DI2 YES SEATPOST INTERNAL BATTERY ONLY
EPS YES. (V3 AND V4 INTERNAL BATTERY)
TT DISC BRAKE LEVERS NOT AVAILABLE
INTERNAL (BRAKES AND GEARS)
Full sleeve
Internal front brake routing through fork blade
DISC ONLY. FLAT MOUNT*
MIN 140mm / MAX160mm (with adapter)
DISC ONLY. FLAT MOUNT*
MIN 140mm / MAX160mm
Shimano = 33mm
Sram = 27mm
1. AERO HOLDER AND BOTTLE (500ml) ORDU SPECIFIC
Standard holder and bottle compatible
TOOLBOX IN DOWNTUBE
Capacity for: 1 inner tube, 2 CO2 cartridges and CO2 adapter
AFTERMARKET OPTIONS. BETWEEN EXTENSIONS
AND SADDLE RAILS***
AFTERMARKET OPTIONS. BETWEEN EXTENSIONS***
NO
NO
NO
NO
NO
SRM: YES
POWER2MAX: YES
STAGES: YES
ROTOR POWER: YES
POWERBOX: YES
QUARQ: YES
SHIMANO: YES
YES
BLUE PAPER ORDU · OMX 2021
0 7 ASSEMBLY AND SPARES
HEADSET AND STEM
HEADTUBE MEASUREMENTS

HEADSET SPECIFICATIONS

Hinge type
TYPE ID* OD**
headset
Integrated
TOP 38.2mm 46.2mm
1"
Integrated
BOTTOM 41.2mm 46.2mm
1-1/8"
* ID: Internal headtube diameter.
** OD: External headtube diameter.
Ø 46.2
Ø 38.2
Ø 41.2
Ø 46.2
Compression ring/
Bearing FSA
crown race
angle CODE
contact angle
Angular contact bearing
45º 36º TH-373
Angular contact bearing
45º 36º TH-873E
ORBEA | 19
EN
Bearing
dimensions
38x27.2x6.5mm
41x30.2x6.5mm